Have a problem with your outside lights tripping? Asking how to protect outdoor extension cord from rain? It’s a simple answer.
In total to protect an outside cord in the rain install it in a fashion in which it is not subject to direct rainfall or moisture. This can be done by installing a simple plastic bucket over the connection or cut a pop bottle in half to cover the end of the cord and what it is plugged into. In addition the cord end can be wrapped in plastic.
This is providing the extension cord is properly protected by an external gfci outlet.
How To Protect Outdoor Extension Cord From Rain
Using the method above, you can tuck the bucket under a tree or tuck it up under whatever you are supplying power too. Example would be outside lights, a pond pump etc.
If you decide to wrap plastic around the connection make sure the connection is tight. You should use electrical tape to tape the cord end together with whatever is plugged in. Then wrap in in plastic wrap, or cling wrap commonly used in your kitchen.
The less change you give that connection to see moisture the better chance you have to keep the gfci trip tripping. This is actually a common issue with outdoor christmas lights.
Is it OK for outdoor extension cords to get wet?
Maybe not, depending on the circumstances. When it comes to wet conditions, it’s not always wise to trust extension cords and the electricity they carry.
There are numerous reasons why wetness could negatively affect your outdoor extension cord. We all know that water conducts electricity–not good for an extension cord with a wet connection! If you don’t want to get shocked by your own wiring, keep that cord at a safe distance from standing water.
Plus you never know when a storm will roll in and rain down on your outdoor extension cords. This could result in a broken wire or electrocution hazard if the wire is touching untreated ground.
If you’re still considering using an outdoor extension cord, there are some ways to protect yourself from getting shocked or electrocuted:
– Don’t have it run near any large metal objects–lawnmower motors, fences etc.–that could conduct electricity into the wire;
– Use electrical tape around exposed wires;
– Wrap electrical tape around the connections of exposed wires;
– Use plastic wraps and baggies over exposed wires; or
– Use plastic buckets over exposed wires
- Have a proper Outdoor GFCI Outlet
Can you leave outdoor extension cords outside?
Yes but you will be at a higher risk of getting your extension cord wet. Below are some ways to protect your outdoor extension cord from the rain
– Install a simple plastic bucket over the connection or cut a pop bottle in half to cover the end of the cord and what it is plugged into. In addition, the cord end can be wrapped in plastic.
– Use electrical tape to tape the cord end together with whatever is plugged in. Then wrap in in plastic wrap, or cling wrap commonly used in your kitchen.
– Wrap the cord end and what it is plugged into tightly using electrical tape before wrapping it with anything else. Some cords are not rated for inside use and should not be left outside.
How do you dry a wet extension cord?
There are two methods you can use to dry a wet extension cord. The first is by using a hair drier, and the second is using a heat gun.
To dry an extension cord with a hair dryer, wrap it in paper towels and run it under a hot shower for about five minutes.
The second method of drying a wet extension cord is by using a heat gun. To dry an extension cord with a heat gun, set the temperature on low, and put the end of the cord into the barrel of the heat gun. Make sure that you hold on tight so it doesn’t fall out of your hand! While holding on tight to the extension cord, turn your heat gun on and leave it for about ten minutes.
What happens if my extension cord gets wet?
If your extension cord gets wet, it’s going to short out the circuit and potentially cause a fire or an electrical shock.
So, take the extra step and protect your outdoor cords with this simple method. Not only will you prevent potential hazards, but you’ll also avoid a costly service call.
Are outdoor outlets safe in rain?
The answer is no, outdoor outlets are not safe in the rain.
In fact, when it rains, there is a high chance of electricity being short-circuited through your outdoor outlets. And if it’s an extension cord that you’re plugging into an outlet, the risk is even greater.
So what can you do to protect your outdoor outlets? Not much unfortunately but there are some simple things you can do to stop them from tripping when it rains.
First off, make sure that the outlet you are using is within 2 feet of a ground or earth wire. This will prevent any water from running down the cord and into the outlet and getting in between the wires. Next make sure your cords are not exposed to direct rainfall or moisture. This means tucking them under anything they are supplying power too like trees etc. It also means covering any exposed end with plastic or electrical tape before wrapping in cling wrap or plastic wrap as mentioned above. Finally cover your cord with a bucket as mentioned above to further protect against water damage and short-circuiting.
Can an extension cord be submerged in water?
The short answer is NO. The long answer is that it depends on how much water gets on the cord. If you put a bucket over your extension cord and the bucket is not getting wet then you are in good shape. However, if your bucket fills up with water then your extension cord will likely be submerged too.
Your best bet is to make sure that all of your outdoor cords are wrapped in plastic or have a pop bottle over them before they go outside and also ensure that the cord end being plugged into is tightly taped together or wrapped to make sure they don’t get wet. You should also consider using an outdoor extension cord cover which protects against moisture and allows for easy storage.
How do you wrap an extension cord outside?
First, if you are using a bucket or bottle to cover the end of your extension cord and what it is plugged into, you will need to make sure that the bucket is big enough to fit over the connection.
Next, using electrical tape wrap the end of your extension cord together with whatever is plugged in. Then wrap in in plastic wrap or cling wrap commonly used in your kitchen.
Finally, you can tuck the bucket under a tree or tuck it up under whatever you are supplying power too. Example would be outside lights, a pond pump etc.
How do you waterproof an outside outlet?
It is difficult to truly waterproof an outside outlet. On the house make sure it is placed under a soffet or part of the house that does not get as much wind and rain. The electrician can provide you with the proper weatherproof gfci outlet. In addition make sure the outdoor receptacle has a proper in use cover over it. An in use cover allows something to be plugged in and close the cover over it to keep the rain out.
Can Christmas light plugs get wet?
Yes, Christmas lights will get wet if they are not installed properly. The easiest way to protect the cords is by covering them in a bucket and tucking it under a tree or cover with plastic wrap. Make sure they are plugged into a proper gfci.
How do you dry outdoor outlets?
Outlets are made up of three components; the connector, the cord, and the grounding wire. When water reaches these three components, electrical conductivity is lost. This is why you have to dry out outdoor outlets after a downpour.
The easiest way to dry out outlets is by running an outlet through a stack of paper towels or some other absorbent material that can hold a lot of moisture. For example, you could use old newspapers or t-shirts. After covering the outlet in paper towel or any other material, plug it back into its original outlet on the wall.
If you don’t want to put your outlet in anything wet and plan on drying it out yourself then make sure not to put anything else over the outlet. Including something high like an outside ceiling fan or lights because they will also splash water onto your outlet when they turn on and off which will cause damage to your cord and connections.
What happens if water gets into outdoor outlet?
If water gets into an outdoor outlet it is always wise to get a certified electrician to come out and check the situation.
In case of an outdoor outlet completely submerged in water, the best way to protect it is with a self-contained sump pump. The pump will draw any water from the area and send it back into your underground drainage system. If you have a sump pump installed, you should never have to worry about getting wet when you are outside.
For more information on how to go about protecting your cords from rain, contact a professional electrician today!
Will water in an outlet trip a breaker?
If the cord you are plugging into has a GFI, then it will trip it. If the outlet is not in a separate circuit and it is on a 20 amp circuit, then the breaker will trip.
Otherwise the cord needs to be plugged into an outlet that is free of any other cords or devices.
If you are unsure of whether your outlet or cord could trip a breaker in this way, call your local electrician for assistance as they may have additional information.
Why does GFCI trip during rain?
GFCI trip can occur during rainfall when water or moisture gets into the ground and causes a short circuit.The GFCI device will detect the short circuit, trip, then reset itself as it is supposed to do.
If you are having problems with your outdoor extension cord tripping during rain, you should consider installing a GFCI breaker inside. They are inexpensive and easy to install by an electrician. We hoped this article helped you understand how to protect outdoor extension cord from rain.
If you would like to see more on the products we recommend.