Skip to Content

Electric Motor Dimensions From Frame Size

Electric Motor Dimensions From Frame Size

Have you ever wondered: “How do I find the Electric Motor Dimensions From the Frame Size?” This article answers your questions. What size is a 42 frame motor? Or a 56 frame motor? You’ll be amazed at what you learn. If you’re ready to buy your first motor, keep reading. We’ll answer your questions in detail, and show you how to calculate the exact dimensions of any motor.

Electric Motor Dimensions From Frame Size

There are several methods of calculating the electric motor’s dimensions. One method involves using the frame size. To do this, simply look at the first two digits of the frame size, and divide by the constant 4 to get the “D” dimension of the motor. For instance, a frame number of 145T would equal a motor “D” of five and a quarter inches, while a frame size of 213 would equal a motor “D” of 5 1/4″.

Another method involves measuring the frame of an electric motor, which is usually marked on its nameplate. This number refers to the length of the motor’s housing and the mounting flange. Some electric motors have special flanges, or a shaft with a pinion or pulley hub. These sizes may be different, so be sure to check the specifications before you buy. However, if the motor is too large, you should consider other alternatives such as smaller motors.

What size is a 42 frame motor?

Electric motor nameplates generally list “frame” as a identifying factor. This refers to the mounting flange and shaft that hold the motor. It’s possible to purchase a motor with a different frame than what you currently have, so determining its exact size is crucial. You may also need to check if the motor has a special shaft. The best way to figure out which frame is right for your application is to check with your motor supplier.

The three-digit motor frame size indicates the motor body length in inches. Longer motors require a longer distance between mounting bolt holes. For example, a 42T frame has a longer F dimension than a 56T frame. Fractional horsepower motor frame sizes are also listed. 42, 48, and 56 are all fractional horsepower frame sizes. These frame sizes specify the shaft length, height, and base mounting holes.

What are the dimensions of a motor?

The NEMA designation for an electric motor shows the dimensions and mounting holes of the electric motor, but does not provide information about its electrical characteristics. Generally, the higher the frame size, the bigger the motor is. However, the dimensions are not necessarily the same for every motor. Some motors have the same horsepower, but different frame sizes. To determine which size is best for your needs, you must understand the different types of motors.

The frame size of an electric motor determines the mechanical interface with any attached actuators. Different frames can have similar dimensions and power, but they can have different geometrical properties. The frame size is not used to determine the shaft length, but instead defines the diameter of the shaft and the outer dimensions of the motor flange. In addition, the motor frame size also defines the mounting hole diameter, bolt circle diameter, and pilot diameter.

What size is a 56 frame motor?

The first question you may have is: “What size is a 56 frame motor?” Generally, the answer depends on the application. For example, a 56H motor has two sets of 2F mounting holes on its base. This type of motor has a standard short shaft, which is suitable for direct-drive applications. The 56HZ frame motor has slots and holes in its base that match the dimensions of its mounting. Its shaft is 5/8″ in diameter and can accommodate a pinion or pulley hub.

Similarly, a 56 frame motor can go up to 5 horsepower, but this type isn’t a fractional frame. Therefore, it is not helpful to refer to a 56 frame motor as a fractional. Regardless of the size of the motor, knowing the frame size can help you choose the right one. EC&M Technical Editor Mark Lamendola has some additional information on 56 frame motors.

What is a 182 frame motor?

The size of the motor frame determines the mechanical interface between the motor and the attached actuators. A motor with the same frame size may differ in power, torque, and geometrical properties. The letter “T” denotes a standardized frame size. Other features include the diameter of the shaft, mounting base, bolt circle, and pilot diameter. If you’re unsure which frame size you need for your application, refer to the NEMA frame assignment tables.

The physical size of a motor is important to know before purchasing one. Although the same size NEMA T-frame motors are available, they may differ considerably in their shaft diameter, mounting holes, and overall size. Make sure to compare the physical size of the new motor with the one you currently have. The same motor size may not be available in a different manufacturer. To make sure that you get the right motor size, measure the old motor and find the dimensions on the label.

What is the difference between 48 Frame and 56 Frame?

The major difference between a 56-frame motor and a 48-frame motor is the size of the frame. A 56-frame motor has a welded base for mounting the motor. The 48-frame motor is square in shape with a round face, whereas a 56-frame motor has a welded square flange base. If you are unsure about the frame size, it’s a good idea to check the spec sheet of your current motor.

What is a frame 80 motor?

Typical electrical motor measurements start at the frame size. Then, the power and current of the motor are determined. In this example, a 400V, four-pole motor has the following frame dimensions:

The dimensions of a motor’s frame are listed in the NEMA standard frames. Motors that are rigidly mounted or have a standard short shaft are labeled 56H. Motors labeled 56H feature two sets of two-F mounting holes. The shaft is usually short for direct-drive applications. The base of a 56HZ frame motor contains slots and holes that match the mounting dimensions. The shaft length can be determined by identifying the dimensions “V” on the NEMA motor frame.

What is the frame size of motor?

The number “F” on an electric motor is not related to the horsepower or the speed of the motor. In fact, the same horsepower motor can be built in three different frame sizes. In order to determine the correct motor size, you should know the speed, horsepower, and enclosure type. The frame size is given in inches. The “D” dimension of a motor is equal to its length, divided by the first two digits.

The term “frame size” is also used to describe the mounting footprint for an electric motor. The dimensions of the frame are related to the shaft diameter and mounting flange. When a motor has the same frame size, the motor can be replaced with the same one of the same size from another manufacturer. Currently, there are three different frame sizes. The oldest is the original frame size. This motor will be soon needing replacement, but it still works.

Frame size is a key element to selecting an electric motor. Motors with the same frame size are similar in shaft height and base mounting hole spacing. However, some U-frame motors will eventually have to be replaced. Having a proper frame size will simplify your selection process. As you might have guessed, there’s a complicated process behind selecting an electric motor. However, by knowing what size frame you need, you can order the right motor for your application.

What is a 180 Frame Motor?

If you’re unfamiliar with the term, “180 frame motor” means a motor with a shaft size of approximately 48 mm and a length of 110 mm. The term is commonly used in countries outside of the U.S. to refer to motors used in compressors. Basically, it means that the motor’s electrical standards meet the International Electrotechnical Commission (IEC) guidelines.

What Does the T Mean in a Motor Frame Size?

What does the T mean in a motor’s frame size? Typically, the first two digits indicate the motor’s shaft height. The shaft height is the distance from the center of the shaft to the mounting surface. The first two digits are usually noted as “T” on the motor’s nameplate. In other words, a motor with a 324T frame size has a shaft height of eight inches. The last digit is the NEMA code, which provides important details about the motor’s mounting base and bolt holes.

In the past, motors with the same frame size were interchangeable. Since the same frame size means the same horsepower, wattage and enclosure, it is possible to replace the motor with a similar motor from another manufacturer. This process has resulted in three distinct frame sizes: original, T, and modern. The first is the oldest, and will need replacement in the near future, while the second will operate today.

When looking for replacement motors, it’s helpful to understand what the letters T, D, and Y mean. The letters “C” and “D” denote the flange at the drive end. “S” denotes a short shaft. Other letter designations, such as “S,” are usually related to different mounting options or special non-NEMA regulated shaft dimensions. Finally, the “Z” stands for special machining. While most motors have similar numbers and sizes, the “Z” is often not stamped on the frame.

If you would like to see more on the products we recommend.